Stationary, Acetylene 1,5 Bar
IBEDA gas manifolds for Acetylene comply with DIN EN 14114 and TRAC 204, 206 and 208. They are mounted on a stainless steel plate and are BAM tested and approved. The modular design provides the highest flexibility in installation and ensures to meet the customer`s requirement. The entire capacity range up to 150 m3 /h can be covered using this modular concept.
Stationary, Acetylene 2,5 Bar
IBEDA gas manifolds for Acetylene according to DIN EN 14114 for a working pressure of 2,5 bar are required for special applications, such as high-velocity flame spraying. All safety-relevant components are BAM tested and approved. Pressure regulator and pipelines are designed for the special demand.
Stationary Auto-Change Manifold Acetylene
IBEDA gas manifolds for Acetylene with automatic change-over unit comply with DIN EN 14114 and TRAC 204, 206 and 208. They are supplied in either a mechanical or electrical version. The mechanical change-over is realised by the pressure level set at the main pressure regulator. The control signal of the contact gauge can be sent to an alarm panel either with an optical or an audible signal indicating that a cylinder/MCP (multi cylinder pack) needs to be changed. The electrical switch-over unit is additionally equipped with a solenoid valve which allows for the continuous supply of gas. The contact gauge is always installed at the high-pressure area in order to ensure sufficient pressure difference for smooth change-over cycles.
Stationary, Oxygen and Technical Gases
IBEDA gas manifolds for Oxygen and technical gases are mounted on stainless steel plates. All safety-related components are BAM tested and approved. The modular design provides the highest flexibility in installation and ensures to meet the customer`s requirement. The entire capacity range up to 320 m3 /h and cylinder or bundle pressures up to 300 bar can be covered by the modular concept.
Stationary Mechanically Controlled Auto-Change Manifold Oxygen and Technical Gases
Mechanically controlled IBEDA gas manifolds for Oxygen and technical gases (priority circuit). The mechanical change-over is realised by the pressure level set at the main pressure regulator. The control signal of the contact gauge can be sent to an alarm panel either with an optical or an audible signal indicating that a cylinder/MCP (multi-cylinder pack) needs to be changed.
Stationary Pneumatically Controlled Auto-Change Manifold Oxygen and Technical Gases
Pneumatically controlled IBEDA auto-change gas manifolds are pre-adjusted to a defined working pressure. The switch-over unit changes at a differential pressure of 3 bar. The control signal of the contact gauge can be sent to an alarm panel either with an optical or an audible signal indicating that a cylinder/MCP (multi-cylinder pack) needs to be changed.
Stationary Electrically Controlled Auto-Change Manifold Oxygen and Technical Gases
Electrically controlled IBEDA auto-change gas manifolds. The electrical switch-over unit is equipped with a contact gauge and a solenoid valve to change over. The contact gauge is always installed at the high-pressure area. The changing pressure is adjustable according to the customer`s requirements. This allows for a continuous, uninterrupted supply of gas.
